Vacature Nieuws

Ml - Manufacturing Engineer Yieldstar Sensor Assembly Ref. 11.003.096

  • Banen
    Ajilon Engineering part of Adecco
    Introduction: A very interesting position for an engineer who feels challenged in improving the production process to ensure product quality, short lead-times and short time to market for Production. Job Mission: To design, maintain, and optimize production processes and adapt to changed output requirements. Develop and apply methods of measuring the performance of the production process. Support the Production in order to ensure product quality, short lead-times and short time to market. Job Description: Manufacturing Engineer on YieldStar Optic Sensors: from mechanical build and qualification in the Assembly work centre till Metrology setup and qualification in TEST and Install. New Product Introduction: Lays down operating instructions, process flow charts, routings, process parameters and indicators. Brings his knowledge to bear on (new) product development projects, in order to foresee production problems in the design phase and in order to improve the manufacturability of the product and test design. Continuous Improvement: Analyses the production process, points out structural problems and bottlenecks, works out suggestions for improvements and initiates their implementation, often in close cooperation with the surrounded departments as Development, Industrial Engineering, Supply Chain and Customer Support. Support: Contributes to the rapid solution of complex faults and takes the necessary initiatives and practical decisions. Troubleshoot
    Eindhoven
    WO
    32 - 40 uur

    Solliciteren

 

Manufacturing Engineer
Banen
As Manufacturing Engineer you will be responsible to propose and implement improvement projects that will meet company set objectives for production line efficiencies at our assembly plant in Venray. You will work inside a Customer Focussed Cross Functional team, and work closely with the Product Engineer, QA Engineer and Line Manager. In this role you report directly to the Customer Focus Team Leader. As a Manufacturing Engineer your main tasks and responsibilities are: Create proposals in close co-operation with Customer Focussed Cross Functional team that will lead to improvements in manufacturing efficiency; Implement short term and long term manufacturing and process improvement projects, in co-operation with team members and supplier partners; Propose DFA / DFM solutions to drive quality improvements and cost reductions; Troubleshoot and solve assembly stops related to area of expertise; In co-operation with Advanced Process team ensure successful validation and launch of new assembly process lines; Proactively communicate expertise / lessons learnt knowledge across all relevant departments. This will be a project for about 6 months
 
Manufacturing Engineer
Banen
For our client we are searching for a Manufacturing Engineer. Our client is a professional and dynamic company in the rapidly growing international wind energy market. She specializes in the design and development of rotor blades and nacelles f or wind turbines. With her specialty in the composites industry, this organisation with its advanced technology and expertise is unique in the world. As Manufacturing Engineer you are responsible for technical development, audits and evaluation of composite processes that meet the organisations standards of quality and cost. As well as to conduct fundamental research to improve or generate new composite processes to improve quality of product and production processes. You participate in Blade Design Project teams. Tasks: Create the composite production design of our rotor blades and details based on structural and aero dynamical design; Optimize the design to production aspects: production, assembly, reliability, cycle time, cost etc.; Generate and release the conceptual production design, also for future production technologies; Interface with blade factories; Support the first of series production in one of our factories on site; Control the design interfaces to detail design, structural design, aero design (design reviews); Provide requirements for the tooling design; Conduct complex research projects into composite processes with research institutes and universities; Set up laboratory tests, calculates and analyses test results and prepares detailed reports with recommendations and conclusions; Supervise, coordinate, monitor and evaluate evaluation, R&D or large scale tests within production organizations in India, China and USA to ensure (quality) standards are met and followed.
 
Manufacturing Execution Systems Engineer
Catergorie: Advies Consultancy
Veel productiebedrijven worden tegenwoordig geconfronteerd met uitdagingen op het gebied van hun productieoperatie, kostenreductie en concurrentie van lage lonen landen. Daarnaast moeten zij, als gevolg van wet- en regelgeving, hun productie beter beheersen en dit te allen tijde kunnen verantwoorden. Hoe kunnen deze productiebedrijven hun bestaansrecht in Europa rechtvaardigen? Om deze uitdagingen samen met haar klanten aan te kunnen gaan heeft Logica zich gespecialiseerd in Manufacturing Executions Systems (MES). Specifieke IT systemen die zich kenmerken als spin in het web ten opzichte van vele andere applicaties, SAP-systemen en productiebesturing. Voor productiebedrijven is Logica een belangrijke System Integrator, die de markt adviseert op het gebied van MES. Zo geven we jaarlijks een MES survey uit, die wereldwijd een belangrijke rol speelt in de keuze van MES producten. Onze klanten opereren ook vaak wereldwijd. Dat levert hele interessante carrière-uitdagingen op voor jou! Zowel nationaal als internationaal. De Manufacturing IT practice van Logica bestaat uit een team van professionals, die zich richt op het bedenken, implementeren en beheren van slimme oplossingen. Door goed aan te sluiten bij de uitdagingen van onze klanten komen we tot verrassende oplossingen. Als MES engineer ben je geïnteresseerd in vragen en problemen van klanten op het gebied van productieverbetering en vertaalt deze naar oplossingen. Je bent in staat om met MES software te werken en specifieke wensen van klanten in maatwerk te bouwen of standaard oplossingen te configureren. Voor maatwerk zetten we vaak de nieuwste Microsoft tools in om snel tot resultaat te komen. Voor standaard MES software komen ondermeer SAP/ME, MII, Camstar en Aspentech in aanmerking. Je werkt graag in een team, maar kunt ook zelfstandig tot oplossingen komen. Als je voor bepaalde tijd in het buitenland wilt werken is dat een pré! We hebben een grote diversiteit aan klanten, hetgeen borg staat voor een afwisselende baan in onder meer de segmenten food/feed, high tech en de chemische industrie. Adviseren en implementeren van MES systemen en het daardoor verbeteren van de bedrijfsvoering van onze klanten is een van de speerpunten van Logica.
 
Team Leader Manufacturing Assembly
Banen
Sector Information The Manufacturing & Logistics (M&L) organization states the following mission: plan, develop and maintain a global network of qualified suppliers and factories, which is capable of delivering lithographic systems, related products and services that exceed customer expectations regarding quality, lead time, technology and cost. The department NXE assembly is responsible for timely delivery of qualified modules in terms of functional as well as vacuum and cleanliness performance. Job Mission To realize a World Class effective and efficient implementation and execution of the manufacturing process with high quality standards and short cycle times driven by continuously improving our processes and products. Job Description Manages a team of assemblers (15-20 FTE). Manages skill levels, coaches the team members, delegates tasks, controls and drives system progress and planning, sets priorities, solves problems and contributes to a productive working climate. Operationally manages and involves production planners, production engineers, quality engineers. Reports to the Group Leader. The environment is characterized by the introduction of new products and the establishment of a new production organization. It is a high tech/low volume setting and requires a lot of flexibility. Main Responsibilities Realizes the planned output of all deliverables of production, conform plan. Indicates, initiates and drives actions to improve products and/or the production processes. Is responsible for detailed production planning and supervises progress within quality, delivery time and cost objectives. Takes part in project activities related to the introduction of new products in production. Ensure proper execution of HRM policies and procedures.